HUMMER H2 2003-2007 OEM DUNLOP Air Suspension Compressor, Valve Block & Dryer

This Kit Includes the Suspension Double Compressor, Mounting Bracket, Control Module, Solenoid Valve Block and the Air Dryer. The Suspension Compressor inflates or deflates the Air Spring Bags as needed. When the vehicle drops below factory height, the compressor turns on and fills the air bags. This is a New DUNLOP OEM Part Manufactured to OEM Specs. Every single component is NEW and NOT Remanufactured.

The Air Suspension Solenoid Valve block is responsible for distributing the air between the Air Suspension Compressor and the Air Struts or Air Spring Bags in your vehicle. When the O-Rings dry rot and there is an air leak or the electrical components go bad in your Air Suspension Valve Block, you will need to replace it. This Kit Includes the Suspension Mounting Brackets for Easy Installation.

The Most Common cause for a leak in the system are old leaky Air Struts or Air Springs. Please make sure that the problem with your suspension is with your Original Part. Do not trust your safety to companies outside the U.

Placing an Order Signifies that You Accept And Agree to Our Terms and Conditions. Unless a resale certificate is sent. The resale certificate is subject to RMT's approval. This is to ensure that parts pass quality tests.

Except as set forth in 3. In the event that a product proves to be defective, RMTs sole obligation shall be, at its option, to repair or replace the product.

Upon inspection if the supposed defective part does not meet warrantable conditions and / or is in the 3. EXCLUSIONS the Customer will have the option of purchasing a new part and RMT. RMT shall send a part out from stock.

Once the claimed defective RMT part arrives back at RMTs facility a full inspection will be conducted. No employee, agent, or representative of RMT has the authority to waive, alter, vary, or add to the terms hereof without the prior written approval of an officer of RMT. The following products have time limited warranties: 1. ALL CLAIMS MUST BE MADE BY THE CUSTOMER AND MAY NOT BE MADE BY ANY THIRD PARTY. ANY SUCH ATTEMPTED TRANSFER OR ASSIGNMENT SHALL BE NULL AND VOID.

THE CUSTOMER AGREES TO TAKE FULL RESPONSIBILITY FOR ANY AND ALL LABOR COSTS. THE PARTS, ESPECIALLY FOR COMPRESSORS! AFTER INSPECTION OF A PRODUCT, RMT DETERMINES, IN ITS SOLE DISCRETION, THAT IT IS NOT DEFECTIVE IN MATERIAL OR WORKMANSHIP. THIS INCLUDES BUT NOT LIMITED TO; 1. ANY FLUID THAT DOES NOT BELONG TO THE SYSTEM.

ANOTHER LEAK IN THE SYSTEM (LEAKING AIR BLADDERS, OR AIR LINES IN THE SYSTEM ARE LEAKING) IS CAUSING THE RMT PRODUCT TO FAIL CAUSING UNITS SUCH AS AN AIR SUSPENSION COMPRESSOR TO OVER WORK AND BURN OUT THE MOTOR. IMPROPER INSTALLATION OF THE PRODUCT. IMPROPER USE OF THE PART. NOT PROPERLY CONNECTING THE CONNECTORS, SUCH AS REVERSE POLARITY, WRONG PLUGS, AND AFTERMARKET PLUGS. FUSES BEING BLOWN / BURNT OUT DUE TO NOT REPLACING THE RELAY.

ANY PART IN A PRODUCT OR ANY INGREDIENT CONTAINED IN A PRODUCT REQUIRES REPLACEMENT OR REPAIR THROUGH ROUTINE USAGE OR NORMAL WEAR AND TEAR 5. A PRODUCT IS NOT MAINTAINED OR USED IN ACCORDANCE WITH RMTS APPLICABLE OPERATING AND/OR MAINTENANCE MANUALS, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY; 6. A PRODUCT HAS BEEN SUBJECT TO MISUSE, MISAPPLICATION, NEGLIGENCE, NEGLECT (INCLUDING, BUT NOT LIMITED TO, IMPROPER MAINTENANCE OR STORAGE), ACCIDENT, CATASTROPHE, IMPROPER INSTALLATION, MODIFICATION, ADJUSTMENT, REPAIR OR LUBRICATION, WHETHER BY THE CUSTOMER OR ANY THIRD PARTY, WITHOUT THE PRIOR WRITTEN CONSENT OF RMT.

MISUSE SHALL INCLUDE, BUT NOT BE LIMITED TO, DETERIORATION IN A PRODUCT DUE TO CHEMICAL ACTION AND WEAR CAUSED BY THE PRESENCE OF ABRASIVE MATERIALS 7. THE SYSTEM INTO WHICH THE PRODUCT BECOMES INCORPORATED IS NOT COMPATIBLE WITH THE PRODUCT, OR IT IS NOT FREE FROM CRITICAL SPEED OR TORSIONAL OR OTHER TYPE OF VIBRATION WITHIN THE SPECIFIED OPERATING RANGE, NO MATTER HOW INDUCED; OR 8. MORE THAN TWO (2) MINUTES OF RUNTIME IS A SIGN OF OVER WORKING THE COMPRESSOR, RISKING IT TO BURN OUT. 8AM to 6PM EST Monday-Friday.

Great Service & Parts Quality Guaranteed! The item "HUMMER H2 2003-2007 OEM DUNLOP Air Suspension Compressor, Valve Block & Dryer" is in sale since Thursday, May 7, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Shocks & Struts". The seller is "rebuildmastertech" and is located in Pompano Beach, Florida.

This item can be shipped worldwide.

MPN: HUM2-0208-AD4U
Country/Region of Manufacture: United Kingdom
Interchange Part Number: 89060581, 89038592, 89060585
Manufacturer Part Number: HUM2-0208-AD4U
Part Type: Air Suspension Compressor
Included Hardware: Compressor
Other Part Number: Strut, Struts, Bag, Bags, Spring, Springs, Pump
Brand: Dunlop
Fitment Type: Direct Replacement
Warranty: Lifetime